The DRI-FLO 1000

thumbnailThe DRI-FLO 1000 is a ‘bottom transfer’ machine that offers a removal rate up to 1000 bushels per hour. The heavy duty bonnet with removable panels allows easy access to grease the center gearbox. The sweep augers bring grain through “metering ring” liners located under the bonnet.

Fingers on these liners restrict grain flow so an even layer of grain is drawn off the floor without “coning out” in the center of the bin. The grain is then dropped into the basket where it is picked up by the horizontal unload auger and carried to an outside Jumpster Auger, air system, or elevator leg.

Jumpster Auger

Jump from the horizontal unload auger to a grain transfer device, whether it be air transfer, elevator leg, loop, or transfer auger. It’s designed to fit the DRI-FLO 1000 with an 8” unloader and is adjustable to virtually any angle from vertical to horizontal, or from straight away from the drying bin to a 90° angle to the right. The Basic Jumpster is available in convenient lengths of 5’, 10’ and 20’ to fit practically any application. Auger extensions may be added for additional length.

Dri-Flo 1000 Components

COMPUDRY™ Command Center with Printer

The COMPUDRY™ Command Center is designed with the operator in mind.  It is easy to use with fingertip control of your entire drying process.  Make your initial settings to the Command Center, concentrate on harvesting your crop, and keep grain in the drying bin.  You will never have to babysit your dryer again.

Floors and Supports

The Shivvers Channel-Lock Floor offers twice as much open area as the competition with 23% open area, while Shivvers Steel Floor Supports allows maximum airflow with minimum obstruction.  With maximum open area and airflow, you can expect the most drying capacity for your money.


Shivvers augers are constructed of heavy-duty fliting with a 1 ¼ ” shaft and 14-ga. galvanized tube. Once in place, there is no need to move the auger around from bin to bin. Using the CompuDry Command Center, simply select the auger to the desired bin by the flip of a switch.

Heaters & Fans

Designed and built to maximize the drying capacity of your Shivvers Performance System, theBLUEFLAME™ , BLUEFLAME with turbo-booster or our Centrifugal Fan  provides peak drying efficiency with minimal fuel consumption. You can choose a BLUEFLAME™ model to burn liquid propane or natural gas. Because each dryer burns with an intense blue flame, you’re assured of the right gas/air mixture for clean, complete fuel consumption.  Meet today’s fuel economy demands with a Shivvers BLUEFLAME™ dryer.

Grain Spreaders

Shivvers has a variety of spreaders that you can choose from to fit your drying operation.  The high capacity GRAIN HOG (3200 to 5000 BPH) the high-tech CONTROLLED FLOW GRAIN SPREADER (Up to 6000 BPH), and for the ultimate grain spreader, the Shivvers LEVEL-DRY.

Gauges and Thermometer

The long stem thermometer mounts with the probe into the plenum chamber to give an actual temperature reading of the plenum. The static pressure gauge measures back pressure in the plenum area of the drying tank.  To maximize drying efficiency and capacity, it is important to know the static pressure.